Filtered by vendor Linux
Subscriptions
Total
17104 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71200 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ... | ||||
| CVE-2026-23122 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue The previous 7 KB per queue caused TX unit hangs under heavy timestamping load. Reducing to 5 KB avoids these hangs and matches the TSN recommendation in I225/I226 SW User Manual Section 7.5.4. The 8 KB "freed" by this change is currently unused. This reduction is not expected to impact throughput, as the i226 is PCIe-limited for small TSN packets rather than TX-buffer-limited. | ||||
| CVE-2026-23126 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix a race issue related to the operation on bpf_bound_progs list The netdevsim driver lacks a protection mechanism for operations on the bpf_bound_progs list. When the nsim_bpf_create_prog() performs list_add_tail, it is possible that nsim_bpf_destroy_prog() is simultaneously performs list_del. Concurrent operations on the list may lead to list corruption and trigger a kernel crash as follows: [ 417.290971] kernel BUG at lib/list_debug.c:62! [ 417.290983] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 417.290992] CPU: 10 PID: 168 Comm: kworker/10:1 Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 417.291003] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 417.291007] Workqueue: events bpf_prog_free_deferred [ 417.291021] RIP: 0010:__list_del_entry_valid_or_report+0xa7/0xc0 [ 417.291034] Code: a8 ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 48 a1 eb ae e8 ed fb a8 ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 80 a1 eb ae e8 d9 fb a8 ff <0f> 0b 48 89 d1 48 c7 c7 d0 a1 eb ae 48 89 f2 48 89 c6 e8 c2 fb a8 [ 417.291040] RSP: 0018:ffffb16a40807df8 EFLAGS: 00010246 [ 417.291046] RAX: 000000000000006d RBX: ffff8e589866f500 RCX: 0000000000000000 [ 417.291051] RDX: 0000000000000000 RSI: ffff8e59f7b23180 RDI: ffff8e59f7b23180 [ 417.291055] RBP: ffffb16a412c9000 R08: 0000000000000000 R09: 0000000000000003 [ 417.291059] R10: ffffb16a40807c80 R11: ffffffffaf9edce8 R12: ffff8e594427ac20 [ 417.291063] R13: ffff8e59f7b44780 R14: ffff8e58800b7a05 R15: 0000000000000000 [ 417.291074] FS: 0000000000000000(0000) GS:ffff8e59f7b00000(0000) knlGS:0000000000000000 [ 417.291079] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.291083] CR2: 00007fc4083efe08 CR3: 00000001c3626006 CR4: 0000000000770ee0 [ 417.291088] PKRU: 55555554 [ 417.291091] Call Trace: [ 417.291096] <TASK> [ 417.291103] nsim_bpf_destroy_prog+0x31/0x80 [netdevsim] [ 417.291154] __bpf_prog_offload_destroy+0x2a/0x80 [ 417.291163] bpf_prog_dev_bound_destroy+0x6f/0xb0 [ 417.291171] bpf_prog_free_deferred+0x18e/0x1a0 [ 417.291178] process_one_work+0x18a/0x3a0 [ 417.291188] worker_thread+0x27b/0x3a0 [ 417.291197] ? __pfx_worker_thread+0x10/0x10 [ 417.291207] kthread+0xe5/0x120 [ 417.291214] ? __pfx_kthread+0x10/0x10 [ 417.291221] ret_from_fork+0x31/0x50 [ 417.291230] ? __pfx_kthread+0x10/0x10 [ 417.291236] ret_from_fork_asm+0x1a/0x30 [ 417.291246] </TASK> Add a mutex lock, to prevent simultaneous addition and deletion operations on the list. | ||||
| CVE-2026-23127 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix refcount warning on event->mmap_count increment When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the following warning is triggered: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 PoC: struct perf_event_attr attr = {0}; int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd, PERF_FLAG_FD_OUTPUT); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0); This occurs when creating a group member event with the flag PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing the event triggers the warning. Since the event has copied the output_event in perf_event_set_output(), event->rb is set. As a result, perf_mmap_rb() calls refcount_inc(&event->mmap_count) when event->mmap_count = 0. Disallow the case when event->mmap_count = 0. This also prevents two events from updating the same user_page. | ||||
| CVE-2026-23148 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference There is a race condition in nvmet_bio_done() that can cause a NULL pointer dereference in blk_cgroup_bio_start(): 1. nvmet_bio_done() is called when a bio completes 2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req) 3. The queue_response callback can re-queue and re-submit the same request 4. The re-submission reuses the same inline_bio from nvmet_req 5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete) invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL 6. The re-submitted bio enters submit_bio_noacct_nocheck() 7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode RIP: 0010:blk_cgroup_bio_start+0x10/0xd0 Call Trace: submit_bio_noacct_nocheck+0x44/0x250 nvmet_bdev_execute_rw+0x254/0x370 [nvmet] process_one_work+0x193/0x3c0 worker_thread+0x281/0x3a0 Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put() BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before the request can be re-submitted, preventing the race condition. | ||||
| CVE-2026-23154 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix segmentation of forwarding fraglist GRO This patch enhances GSO segment handling by properly checking the SKB_GSO_DODGY flag for frag_list GSO packets, addressing low throughput issues observed when a station accesses IPv4 servers via hotspots with an IPv6-only upstream interface. Specifically, it fixes a bug in GSO segmentation when forwarding GRO packets containing a frag_list. The function skb_segment_list cannot correctly process GRO skbs that have been converted by XLAT, since XLAT only translates the header of the head skb. Consequently, skbs in the frag_list may remain untranslated, resulting in protocol inconsistencies and reduced throughput. To address this, the patch explicitly sets the SKB_GSO_DODGY flag for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers (bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO packets as potentially modified after protocol translation. As a result, GSO segmentation will avoid using skb_segment_list and instead falls back to skb_segment for packets with the SKB_GSO_DODGY flag. This ensures that only safe and fully translated frag_list packets are processed by skb_segment_list, resolving protocol inconsistencies and improving throughput when forwarding GRO packets converted by XLAT. | ||||
| CVE-2026-23155 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): fix error message Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") a failing resubmit URB will print an info message. In the case of a short read where netdev has not yet been assigned, initialize as NULL to avoid dereferencing an undefined value. Also report the error value of the failed resubmit. | ||||
| CVE-2026-23146 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled. | ||||
| CVE-2026-23158 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called. | ||||
| CVE-2026-23166 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <TASK> <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped. | ||||
| CVE-2026-23116 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset and clock enable bits, but is ungated and reset together with the VPUs. So we can't reset G1 or G2 separately, it may led to the system hang. Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data. Let imx8mq_vpu_power_notifier() do really vpu reset. | ||||
| CVE-2026-23123 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: debugfs: initialize src_node and dst_node to empty strings The debugfs_create_str() API assumes that the string pointer is either NULL or points to valid kmalloc() memory. Leaving the pointer uninitialized can cause problems. Initialize src_node and dst_node to empty strings before creating the debugfs entries to guarantee that reads and writes are safe. | ||||
| CVE-2026-23125 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key initialization fails: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2 RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline] RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401 Call Trace: sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189 sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111 sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217 sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052 sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88 sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243 sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127 The issue is triggered when sctp_auth_asoc_init_active_key() fails in sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the command sequence is currently: - SCTP_CMD_PEER_INIT - SCTP_CMD_TIMER_STOP (T1_INIT) - SCTP_CMD_TIMER_START (T1_COOKIE) - SCTP_CMD_NEW_STATE (COOKIE_ECHOED) - SCTP_CMD_ASSOC_SHKEY - SCTP_CMD_GEN_COOKIE_ECHO If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL to be queued by sctp_datamsg_from_user(). Since command interpretation stops on failure, no COOKIE_ECHO should been sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As a result, the DATA chunk can be transmitted together with the COOKIE_ECHO in sctp_outq_flush_data(), leading to the observed issue. Similar to the other places where it calls sctp_auth_asoc_init_active_key() right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting T1_COOKIE. This ensures that if shared key generation fails, authenticated DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT, giving the client another chance to process INIT_ACK and retry key setup. | ||||
| CVE-2026-23131 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names The hp-bioscfg driver attempts to register kobjects with empty names when the HP BIOS returns attributes with empty name strings. This causes multiple kernel warnings: kobject: (00000000135fb5e6): attempted to be registered with empty name! WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310 Add validation in hp_init_bios_buffer_attribute() to check if the attribute name is empty after parsing it from the WMI buffer. If empty, log a debug message and skip registration of that attribute, allowing the module to continue processing other valid attributes. | ||||
| CVE-2026-23135 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. | ||||
| CVE-2026-23137 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing. | ||||
| CVE-2026-23141 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: send: check for inline extents in range_is_hole_in_parent() Before accessing the disk_bytenr field of a file extent item we need to check if we are dealing with an inline extent. This is because for inline extents their data starts at the offset of the disk_bytenr field. So accessing the disk_bytenr means we are accessing inline data or in case the inline data is less than 8 bytes we can actually cause an invalid memory access if this inline extent item is the first item in the leaf or access metadata from other items. | ||||
| CVE-2026-23142 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure When a DAMOS-scheme DAMON sysfs directory setup fails after setup of access_pattern/ directory, subdirectories of access_pattern/ directory are not cleaned up. As a result, DAMON sysfs interface is nearly broken until the system reboots, and the memory for the unremoved directory is leaked. Cleanup the directories under such failures. | ||||
| CVE-2026-23152 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: correctly decode TTLM with default link map TID-To-Link Mapping (TTLM) elements do not contain any link mapping presence indicator if a default mapping is used and parsing needs to be skipped. Note that access points should not explicitly report an advertised TTLM with a default mapping as that is the implied mapping if the element is not included, this is even the case when switching back to the default mapping. However, mac80211 would incorrectly parse the frame and would also read one byte beyond the end of the element. | ||||
| CVE-2026-23153 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix race condition against transaction list The list of transaction is enumerated without acquiring card lock when processing AR response event. This causes a race condition bug when processing AT request completion event concurrently. This commit fixes the bug by put timer start for split transaction expiration into the scope of lock. The value of jiffies in card structure is referred before acquiring the lock. | ||||