| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| The LeadConnector WordPress plugin before 3.0.22 does not have authorization in a REST route, allowing unauthenticated users to call it and overwrite existing data |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.4.42, 3.5.28, and 3.6.9, an authenticated user with RBAC restricted permissions on key ranges can use nested transactions to bypass all key-level authorization. This allows any authenticated user with direct access to etcd to effectively ignore all key range restrictions, accessing the entire etcd data store. Kubernetes does not rely on etcd’s built-in authentication and authorization. Instead, the API server handles authentication and authorization itself, so typical Kubernetes deployments are not affected. Versions 3.4.42, 3.5.28, and 3.6.9 contain a patch. If upgrading is not immediately possible, reduce exposure by treating the affected RPCs as unauthenticated in practice. Restrict network access to etcd server ports so only trusted components can connect and require strong client identity at the transport layer, such as mTLS with tightly scoped client certificate distribution. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.2.1 through 1.6.55, `png_set_tRNS` and `png_set_PLTE` each alias a heap-allocated buffer between `png_struct` and `png_info`, sharing a single allocation across two structs with independent lifetimes. The `trans_alpha` aliasing has been present since at least libpng 1.0, and the `palette` aliasing since at least 1.2.1. Both affect all prior release lines `png_set_tRNS` sets `png_ptr->trans_alpha = info_ptr->trans_alpha` (256-byte buffer) and `png_set_PLTE` sets `info_ptr->palette = png_ptr->palette` (768-byte buffer). In both cases, calling `png_free_data` (with `PNG_FREE_TRNS` or `PNG_FREE_PLTE`) frees the buffer through `info_ptr` while the corresponding `png_ptr` pointer remains dangling. Subsequent row-transform functions dereference and, in some code paths, write to the freed memory. A second call to `png_set_tRNS` or `png_set_PLTE` has the same effect, because both functions call `png_free_data` internally before reallocating the `info_ptr` buffer. Version 1.6.56 fixes the issue. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.6.36 through 1.6.55, an out-of-bounds read and write exists in libpng's ARM/AArch64 Neon-optimized palette expansion path. When expanding 8-bit paletted rows to RGB or RGBA, the Neon loop processes a final partial chunk without verifying that enough input pixels remain. Because the implementation works backward from the end of the row, the final iteration dereferences pointers before the start of the row buffer (OOB read) and writes expanded pixel data to the same underflowed positions (OOB write). This is reachable via normal decoding of attacker-controlled PNG input if Neon is enabled. Version 1.6.56 fixes the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-18 and 6.9.13-43, due to an incorrect return value on certain platforms a pointer is incremented past the end of a buffer that is on the stack and that could result in an out of bounds write. Versions 7.1.2-18 and 6.9.13-43 patch the issue. |
| Picomatch is a glob matcher written JavaScript. Versions prior to 4.0.4, 3.0.2, and 2.3.2 are vulnerable to a method injection vulnerability affecting the `POSIX_REGEX_SOURCE` object. Because the object inherits from `Object.prototype`, specially crafted POSIX bracket expressions (e.g., `[[:constructor:]]`) can reference inherited method names. These methods are implicitly converted to strings and injected into the generated regular expression. This leads to incorrect glob matching behavior (integrity impact), where patterns may match unintended filenames. The issue does not enable remote code execution, but it can cause security-relevant logic errors in applications that rely on glob matching for filtering, validation, or access control. All users of affected `picomatch` versions that process untrusted or user-controlled glob patterns are potentially impacted. This issue is fixed in picomatch 4.0.4, 3.0.2 and 2.3.2. Users should upgrade to one of these versions or later, depending on their supported release line. If upgrading is not immediately possible, avoid passing untrusted glob patterns to picomatch. Possible mitigations include sanitizing or rejecting untrusted glob patterns, especially those containing POSIX character classes like `[[:...:]]`; avoiding the use of POSIX bracket expressions if user input is involved; and manually patching the library by modifying `POSIX_REGEX_SOURCE` to use a null prototype. |
| In TigerVNC before 1.16.2, Image.cxx in x0vncserver allows other users to observe or manipulate the screen contents, or cause an application crash, because of incorrect permissions. |
| Incus is a system container and virtual machine manager. Prior to version 6.23.0, a specially crafted storage bucket backup can be used by an user with access to Incus' storage bucket feature to crash the Incus daemon. Repeated use of this attack can be used to keep the server offline causing a denial of service of the control plane API. This does not impact any running workload, existing containers and virtual machines will keep operating. Version 6.23.0 fixes the issue. |
| vLLM is an inference and serving engine for large language models (LLMs). Starting in version 0.10.1 and prior to version 0.18.0, two model implementation files hardcode `trust_remote_code=True` when loading sub-components, bypassing the user's explicit `--trust-remote-code=False` security opt-out. This enables remote code execution via malicious model repositories even when the user has explicitly disabled remote code trust. Version 0.18.0 patches the issue. |
| dynaconf is a configuration management tool for Python. Prior to version 3.2.13, Dynaconf is vulnerable to Server-Side Template Injection (SSTI) due to unsafe template evaluation in the @Jinja resolver. When the jinja2 package is installed, Dynaconf evaluates template expressions embedded in configuration values without a sandboxed environment. This issue has been patched in version 3.2.13. |
| MyTube is a self-hosted downloader and player for several video websites Prior to version 1.8.71, an unauthenticated attacker can register an arbitrary passkey and subsequently authenticate with it to obtain a full admin session. The application exposes passkey registration endpoints without requiring prior authentication. Any successfully authenticated passkey is automatically granted an administrator token, allowing full administrative access to the application. This enables a complete compromise of the application without requiring any existing credentials. Version 1.8.71 fixes the issue. |
| Invoice Ninja is a source-available invoice, quote, project and time-tracking app built with Laravel. Product notes fields in Invoice Ninja v5.13.0 allow raw HTML via Markdown rendering, enabling stored XSS. The Markdown parser output was not sanitized with `purify::clean()` before being included in invoice templates. This is fixed in v5.13.4 by the vendor by adding `purify::clean()` to sanitize Markdown output. |
| Lychee is a free, open-source photo-management tool. Prior to version 7.5.3, the photo `description` field is stored without HTML sanitization and rendered using `{!! $item->summary !!}` (Blade unescaped output) in the RSS, Atom, and JSON feed templates. The `/feed` endpoint is publicly accessible without authentication, allowing any RSS reader to execute attacker-controlled JavaScript. Version 7.5.3 fixes the issue. |
| MyTube is a self-hosted downloader and player for several video websites Prior to version 1.8.69, an authorization bypass in the `/api/settings/import-database` endpoint allows attackers with low-privilege credentials to upload and replace the application's SQLite database entirely, leading to a full compromise of the application. The bypass is relevant for other POST routes as well. Version 1.8.69 fixes the issue. |
| Kestra is an open-source, event-driven orchestration platform Versions up to and including 1.3.3 render user-supplied flow YAML metadata fields — description, inputs[].displayName, inputs[].description — through the Markdown.vue component instantiated with html: true. The resulting HTML is injected into the DOM via Vue's v-html without any sanitization. This allows a flow author to embed arbitrary JavaScript that executes in the browser of any user who views or interacts with the flow. This is distinct from GHSA-r36c-83hm-pc8j / CVE-2026-29082, which covers only FilePreview.vue rendering .md files from execution outputs. The present finding affects different components, different data sources, and requires significantly less user interaction (zero-click for input.displayName). As of time of publication, it is unclear if a patch is available. |
| Invoice Ninja is a source-available invoice, quote, project and time-tracking app built with Laravel. Invoice line item descriptions in Invoice Ninja v5.13.0 bypass the XSS denylist filter, allowing stored XSS payloads to execute when invoices are rendered in the PDF preview or client portal. The line item description field was not passed through `purify::clean()` before rendering. This is fixed in v5.13.4 by the vendor by adding `purify::clean()` to sanitize line item descriptions. |
