| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container |
| Lexbor is a web browser engine library. Prior to 2.7.0, a type‑confusion vulnerability exists in Lexbor’s HTML fragment parser. When ns = UNDEF, a comment is created using the “unknown element” constructor. The comment’s data are written into the element’s fields via an unsafe cast, corrupting the qualified_name field. That corrupted value is later used as a pointer and dereferenced near the zero page. This vulnerability is fixed in 2.7.0. |
| A vulnerability was detected in Portabilis i-Educar 2.11. This impacts an unknown function of the file /intranet/educar_servidor_curso_lst.php of the component Endpoint. Performing a manipulation of the argument Name results in cross site scripting. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in TRENDnet TEW-824DRU 1.010B01/1.04B01. The impacted element is the function sub_420A78 of the file apply_sec.cgi of the component Web Interface. Such manipulation of the argument Language leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SFTPGo is an open source, event-driven file transfer solution. In SFTPGo versions prior to 2.7.1, a path normalization discrepancy between the protocol handlers and the internal Virtual Filesystem routing can lead to an authorization bypass. An authenticated attacker can craft specific file paths to bypass folder-level permissions or escape the boundaries of a configured Virtual Folder. This vulnerability is fixed in 2.7.1. |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 0.14.0 and prior to version 26.0.0, if a user provided callback to `set_tlsext_servername_callback` raised an unhandled exception, this would result in a connection being accepted. If a user was relying on this callback for any security-sensitive behavior, this could allow bypassing it. Starting in version 26.0.0, unhandled exceptions now result in rejecting the connection. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.3, the `pyasn1` library is vulnerable to a Denial of Service (DoS) attack caused by uncontrolled recursion when decoding ASN.1 data with deeply nested structures. An attacker can supply a crafted payload containing thousands of nested `SEQUENCE` (`0x30`) or `SET` (`0x31`) tags with "Indefinite Length" (`0x80`) markers. This forces the decoder to recursively call itself until the Python interpreter crashes with a `RecursionError` or consumes all available memory (OOM), crashing the host application. This is a distinct vulnerability from CVE-2026-23490 (which addressed integer overflows in OID decoding). The fix for CVE-2026-23490 (`MAX_OID_ARC_CONTINUATION_OCTETS`) does not mitigate this recursion issue. Version 0.6.3 fixes this specific issue. |
| Sentry is a developer-first error tracking and performance monitoring tool. Versions prior to 26.1.0 have a cross-organization Insecure Direct Object Reference (IDOR) vulnerability in Sentry's GroupEventJsonView endpoint. Version 26.1.0 patches the issue. |
| The GLPI Inventory Plugin handles network discovery, inventory, software deployment, and data collection for GLPI agents. Prior to 1.6.6, non sanitized user input can lend to an SQL injection from reports, with adequate rights. This vulnerability is fixed in 1.6.6. |
| SFTPGo is an open source, event-driven file transfer solution. SFTPGo versions before v2.7.1 contain an input validation issue in the handling of dynamic group paths, for example, home directories or key prefixes. When a group is configured with a dynamic home directory or key prefix using placeholders like %username%, the value replacing the placeholder is not strictly sanitized against relative path components. Consequently, if a user is created with a specially crafted username the resulting path may resolve to a parent directory instead of the intended sub-directory. This issue is fixed in version v2.7.1 |
| After the publication of the PoC by the researcher and further analysis, we have determined that this issue does not constitute a valid vulnerability. The technique described is an obfuscation method and does not bypass or impact any implicit or explicit security controls. |
| Dagu is a workflow engine with a built-in Web user interface. Prior to 2.2.4, when Dagu is configured with HTTP Basic authentication (DAGU_AUTH_MODE=basic), all Server-Sent Events (SSE) endpoints are accessible without any credentials. This allows unauthenticated attackers to access real-time DAG execution data, workflow configurations, execution logs, and queue status — bypassing the authentication that protects the REST API. The buildStreamAuthOptions() function builds authentication options for SSE/streaming endpoints. When the auth mode is basic, it returns an auth.Options struct with BasicAuthEnabled: true but AuthRequired defaults to false (Go zero value). The authentication middleware at internal/service/frontend/auth/middleware.go allows unauthenticated requests when AuthRequired is false. This vulnerability is fixed in 2.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
Octeontx2-af: Add proper checks for fwdata
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Internal error: Oops: 0000000096000005 [#1] SMP
[ 10.460721] Modules linked in:
[ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT
[ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT)
[ 10.479793] Workqueue: events work_for_cpu_fn
[ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.491124] pc : rvu_sdp_init+0x18/0x114
[ 10.495051] lr : rvu_probe+0xe58/0x1d18 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory corruption due to not set vif driver data size
The struct ieee80211_vif contains trailing space for vif driver data,
when struct ieee80211_vif is allocated, the total memory size that is
allocated is sizeof(struct ieee80211_vif) + size of vif driver data.
The size of vif driver data is set by each WiFi driver as needed.
The RSI911x driver does not set vif driver data size, no trailing space
for vif driver data is therefore allocated past struct ieee80211_vif .
The RSI911x driver does however use the vif driver data to store its
vif driver data structure "struct vif_priv". An access to vif->drv_priv
leads to access out of struct ieee80211_vif bounds and corruption of
some memory.
In case of the failure observed locally, rsi_mac80211_add_interface()
would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv;
vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member
struct list_head new_flows . The flow = list_first_entry(head, struct
fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus
address, which when accessed causes a crash.
The trigger is very simple, boot the machine with init=/bin/sh , mount
devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1",
"ip link set wlan0 down" and the crash occurs.
Fix this by setting the correct size of vif driver data, which is the
size of "struct vif_priv", so that memory is allocated and the driver
can store its driver data in it, instead of corrupting memory around
it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Enforce that teql can only be used as root qdisc
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF. |
| OpenClaw version 2026.2.22 prior to 2026.2.23 contain an arbitrary code execution vulnerability in shell-env that allows attackers to execute attacker-controlled binaries by exploiting trusted-prefix fallback logic for the $SHELL variable. An attacker can influence the $SHELL environment variable on systems with writable trusted-prefix directories such as /opt/homebrew/bin to execute arbitrary binaries in the OpenClaw process context. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: fix double-free in nr_route_frame()
In nr_route_frame(), old_skb is immediately freed without checking if
nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,
the caller function will free old_skb again, causing a double-free bug.
Therefore, to prevent this, we need to modify it to check whether
nr_neigh->ax25 is NULL before freeing old_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: limit BOND_MODE_8023AD to Ethernet devices
BOND_MODE_8023AD makes sense for ARPHRD_ETHER only.
syzbot reported:
BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline]
BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497
CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
__hw_addr_create net/core/dev_addr_lists.c:63 [inline]
__hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:868 [inline]
dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886
bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180
do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963
do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
____sys_sendmsg+0x505/0x820 net/socket.c:2592
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646
__sys_sendmsg+0x164/0x220 net/socket.c:2678
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307
do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
</TASK>
The buggy address belongs to the variable:
lacpdu_mcast_addr+0x0/0x40 |
| Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, in `next dev`, cross-site protection for internal websocket endpoints could treat `Origin: null` as a bypass case even if `allowedDevOrigins` is configured, allowing privacy-sensitive/opaque contexts (for example sandboxed documents) to connect unexpectedly. If a dev server is reachable from attacker-controlled content, an attacker may be able to connect to the HMR websocket channel and interact with dev websocket traffic. This affects development mode only. Apps without a configured `allowedDevOrigins` still allow connections from any origin. The issue is fixed in version 16.1.7 by validating `Origin: null` through the same cross-site origin-allowance checks used for other origins. If upgrading is not immediately possible, do not expose `next dev` to untrusted networks and/or block websocket upgrades to `/_next/webpack-hmr` when `Origin` is `null` at the proxy. |
| Umbraco is an ASP.NET CMS. From 14.0.0 to before 16.5.1 and 17.2.2, A broken object-level authorization vulnerability exists in a backoffice API endpoint that allows authenticated users to assign domain-related data to content nodes without proper authorization checks. The issue is caused by insufficient authorization enforcement on the affected API endpoint, whereby via an API call, domains can be set on content nodes that the editor does not have permission to access (either via user group privileges or start nodes). This vulnerability is fixed in 16.5.1 and 17.2.2. |
