| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In LibreChat 0.8.1-rc2, a logged-in user obtains a JWT for both the LibreChat API and the RAG API. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: secure_seq: add back ports to TS offset
This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix memory allocation in nvme_pr_read_keys()
nvme_pr_read_keys() takes num_keys from userspace and uses it to
calculate the allocation size for rse via struct_size(). The upper
limit is PR_KEYS_MAX (64K).
A malicious or buggy userspace can pass a large num_keys value that
results in a 4MB allocation attempt at most, causing a warning in
the page allocator when the order exceeds MAX_PAGE_ORDER.
To fix this, use kvzalloc() instead of kzalloc().
This bug has the same reasoning and fix with the patch below:
https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/
Warning log:
WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272
Modules linked in:
CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216
Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d
RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0
RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0
RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001
R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000
R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620
FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0
Call Trace:
<TASK>
alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486
alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557
___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598
__kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245
blkdev_pr_read_keys block/ioctl.c:456 [inline]
blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730
blkdev_ioctl+0x299/0x700 block/ioctl.c:786
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583
x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb893d3108d
Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d
RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: check return value of indx_find to avoid infinite loop
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability. |
| beefree.io SDK is vulnerable to Stored XSS in Social Media icon URL parameter in email builder functionality. Malicious attacker can inject arbitrary HTML and JS into template, which will be rendered/executed when visiting preview page. However due to beefree's Content Security Policy not all payloads will execute successfully.
This issue has been fixed in version 3.47.0. |
| LibreChat version 0.8.1-rc2 uses the same JWT secret for the user session mechanism and RAG API which compromises the service-level authentication of the RAG API. |
| Missing Authorization vulnerability in WebberZone Contextual Related Posts allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Contextual Related Posts: from n/a before 4.2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add missing syscalls to read class
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class. |
| The Yoast Duplicate Post plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the clone_bulk_action_handler() and republish_request() functions in all versions up to, and including, 4.5. This makes it possible for authenticated attackers, with Contributor-level access and above, to duplicate any post on the site including private, draft, and trashed posts they shouldn't have access to. Additionally, attackers with Author-level access and above can use the Rewrite & Republish feature to overwrite any published post with their own content. |
| A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. |
| An unauthenticated remote attacker can perform a command injection via Modbus-TCP or Modbus-RTU to gain read and write access on the affected device. |
| Local privilege escalation in snapd on Linux allows local attackers to get root privilege by re-creating snap's private /tmp directory when systemd-tmpfiles is configured to automatically clean up this directory. This issue affects Ubuntu 16.04 LTS, 18.04 LTS, 20.04 LTS, 22.04 LTS, and 24.04 LTS. |
| A critical SQL injection vulnerability in Spring AI's MariaDBFilterExpressionConverter allows attackers to bypass metadata-based access controls and execute arbitrary SQL commands.
The vulnerability exists due to missing input sanitization. |
